One end of an insulated metal rod is maintained at 100c and the other end is maintained at 0.00 c by an ice–water mixture. The rod has a length of 75.0cm and a cross-sectional area of 1.25cm . The heat conducted by the rod melts a mass of 6.15g of ice in a time of 10.0 min .find the thermal conductivity k of the metal?k= W/(m. K)

The thermal conductivity of the insulated metal rod is .

Explanation:

This is a situation of one-dimensional thermal conduction of a metal rod in a temperature gradient. The heat transfer rate through the metal rod is calculated by this expression:

Where:

- Heat transfer due to conduction, measured in watts.

- Length of the metal rod, measured in meters.

- Cross section area of the metal rod, measured in meters.

- Thermal conductivity, measured in .

Let assume that heat conducted to melt some ice was transfered at constant rate, so that definition of power can be translated as:

Where Q is the latent heat required to melt the ice, whose formula is:

Where:

- Mass of ice, measured in kilograms.

- Latent heat of fussion, measured in joules per gram.

The latent heat of fussion of water is equal to . Hence, the total heat received by the ice is:

Now, the heat transfer rate is:

Turning to the thermal conduction equation, thermal conductivity is cleared and computed after replacing remaining variables: (, , , )

The thermal conductivity of the insulated metal rod is .

speed

ratio of distance traveled to time interval

net force

vector sum of forces on object

object

source of diverging light rays either luminous or illuminated

don't remove my answer im trying my best to answer them

explanation: