Physics, 26.06.2020 16:01 aureliafung2p7cxoo

Calculate the linear acceleration (in m/s2) of a car, the 0.310 m radius tires of which have an angular acceleration of 15.0 rad/s2. Assume no slippage. m/s2 (b) How many revolutions do the tires make in 2.50 s if they start from rest

Answers: 2

Show answers

Answers

a) The linear acceleration of the car is $4.65\,\frac{m}{s^{2}}$ , b) The tires did 7.46 revolutions in 2.50 seconds from rest.

Explanation:

a) A tire experiments a general plane motion, which is the sum of rotation and translation. The linear acceleration experimented by the car corresponds to the linear acceleration at the center of the tire with respect to the point of contact between tire and ground, whose magnitude is described by the following formula measured in meters per square second:

$\| \vec a \| = \sqrt{a_{r}^{2} + a_{t}^{2}}$

Where:

$a_{r}$ - Magnitude of the radial acceleration, measured in meters per square second.

$a_{t}$ - Magnitude of the tangent acceleration, measured in meters per square second.

Let suppose that tire is moving on a horizontal ground, since radius of curvature is too big, then radial acceleration tends to be zero. So that:

$\| \vec a \| = a_{t}$

$\| \vec a \| = r \cdot \alpha$

Where:

$\alpha$ - Angular acceleration, measured in radians per square second.

- Radius of rotation (Radius of a tire), measured in meters.

Given that $\alpha = 15\,\frac{rad}{s^{2}}$ and $r = 0.31\,m$ . The linear acceleration experimented by the car is:

$\| \vec a \| = (0.31\,m)\cdot \left(15\,\frac{rad}{s^{2}} \right)$

$\| \vec a \| = 4.65\,\frac{m}{s^{2}}$

The linear acceleration of the car is $4.65\,\frac{m}{s^{2}}$ .

b) Assuming that angular acceleration is constant, the following kinematic equation is used:

$\theta = \theta_{o} + \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

Where:

$\theta$ - Final angular position, measured in radians.

$\theta_{o}$ - Initial angular position, measured in radians.

$\omega_{o}$ - Initial angular speed, measured in radians per second.

$\alpha$ - Angular acceleration, measured in radians per square second.

- Time, measured in seconds.

If $\theta_{o} = 0\,rad$ , $\omega_{o} = 0\,\frac{rad}{s}$ , $\alpha = 15\,\frac{rad}{s^{2}}$ , the final angular position is:

$\theta = 0\,rad + \left(0\,\frac{rad}{s}\right)\cdot (2.50\,s) + \frac{1}{2}\cdot \left(15\,\frac{rad}{s^{2}}\right)\cdot (2.50\,s)^{2}$

$\theta = 46.875\,rad$

Let convert this outcome into revolutions: (1 revolution is equal to 2π radians)

$\theta = 7.46\,rev$

The tires did 7.46 revolutions in 2.50 seconds from rest.

Answer from: Quest

what experimental evidence led scientists to change from the previous model to this one?

a few of the positive particles aimed at a gold foil seemed to bounce back.

the colors of light emitted from heated atoms had very specific energies.

experiments with water vapor showed that elements combine in specific proportions.

cathode rays were bent in the same way whenever a magnet was brought near them.

Answer from: Quest

option number c is the right answer.

Another question on Physics

Physics, 22.06.2019 09:40

Asatellite component is in the shape of a cube with 10cm edges, has an evenly distributed mass of 2 kg and one bolt hole at each of four corners. if the maximum predicted random vibration environment is 10 grms, what bolt size would be a good choice for restraint? what other factors might drive bolt size besides force/stress?

Answers: 2

Answer

Physics, 22.06.2019 22:00

Ais not a mixture. colloid compound suspension solution

Answers: 1

Answer

Physics, 23.06.2019 00:30

Discuss the difference between thermal energy and heat. (terrance) terrance, egolf, r., congdon, donald. physical science student text, 5th edition. bju press, 2014. vitalbook file.

Answers: 1

Answer

Physics, 23.06.2019 05:10

How do the forces acting on a boat compare to the force acting on a plane ?

Answers: 2

Answer

You know the right answer?

Calculate the linear acceleration (in m/s2) of a car, the 0.310 m radius tires of which have an angu...

Questions