Physics, 16.07.2020 23:01 Jonny13Diaz

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleration of 26.0 rad/s2 until a circuit breaker trips at time t = 2.40 s. From then on, it turns through an angle 435 rad as it coasts to a stop at constant angular acceleration. Part APart complete Through what total angle did the wheel turn between t=0 and the time it stopped? Express your answer in radians. θ = 570 rad Previous Answers Correct Part B At what time did it stop? Express your answer in seconds. t = nothing s Request Answer Part C What was its acceleration as it slowed down? Express your answer in radians per second squared.

Answers: 3

Show answers

Answers

a) The total angle of the grinding wheel is 569.88 radians, b) The grinding wheel stop at t = 12.354 seconds, c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Explanation:

Since the grinding wheel accelerates and decelerates at constant rate, motion can be represented by the following kinematic equations:

$\theta = \theta_{o} + \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

$\omega = \omega_{o} + \alpha \cdot t$

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

Where:

$\theta_{o}$ , $\theta$ - Initial and final angular position, measured in radians.

$\omega_{o}$ , $\omega$ - Initial and final angular speed, measured in radians per second.

$\alpha$ - Angular acceleration, measured in radians per square second.

- Time, measured in seconds.

Likewise, the grinding wheel experiments two different regimes:

1) The grinding wheel accelerates during 2.40 seconds.

2) The grinding wheel decelerates until rest is reached.

a) The change in angular position during the Acceleration Stage can be obtained of the following expression:

$\theta - \theta_{o} = \omega_{o}\cdot t + \frac{1}{2}\cdot \alpha \cdot t^{2}$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\theta-\theta_{o} = \left(25\,\frac{rad}{s} \right)\cdot (2.40\,s) + \frac{1}{2}\cdot \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)^{2}$

$\theta-\theta_{o} = 134.88\,rad$

The final angular angular speed can be found by the equation:

$\omega = \omega_{o} + \alpha \cdot t$

If $\omega_{o} = 25\,\frac{rad}{s}$ , $t = 2.40\,s$ and $\alpha = 26\,\frac{rad}{s^{2}}$ , then:

$\omega = 25\,\frac{rad}{s} + \left(26\,\frac{rad}{s^{2}} \right)\cdot (2.40\,s)$

$\omega = 87.4\,\frac{rad}{s}$

The total angle that grinding wheel did from t = 0 s and the time it stopped is:

$\Delta \theta = 134.88\,rad + 435\,rad$

$\Delta \theta = 569.88\,rad$

The total angle of the grinding wheel is 569.88 radians.

b) Before finding the instant when the grinding wheel stops, it is needed to find the value of angular deceleration, which can be determined from the following kinematic expression:

$\omega^{2} = \omega_{o}^{2} + 2 \cdot \alpha \cdot (\theta-\theta_{o})$

The angular acceleration is now cleared:

$\alpha = \frac{\omega^{2}-\omega_{o}^{2}}{2\cdot (\theta-\theta_{o})}$

Given that $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\theta-\theta_{o} = 435\,rad$ , the angular deceleration is:

$\alpha = \frac{ \left(0\,\frac{rad}{s}\right)^{2}-\left(87.4\,\frac{rad}{s} \right)^{2}}{2\cdot \left(435\,rad\right)}$

$\alpha = -8.780\,\frac{rad}{s^{2}}$

Now, the time interval of the Deceleration Phase is obtained from this formula:

$\omega = \omega_{o} + \alpha \cdot t$

$t = \frac{\omega - \omega_{o}}{\alpha}$

If $\omega_{o} = 87.4\,\frac{rad}{s}$ , $\omega = 0\,\frac{rad}{s}$ and $\alpha = -8.780\,\frac{rad}{s^{2}}$ , the time interval is:

$t = \frac{0\,\frac{rad}{s} - 87.4\,\frac{rad}{s} }{-8.780\,\frac{rad}{s^{2}} }$

$t = 9.954\,s$

The total time needed for the grinding wheel before stopping is:

$t_{T} = 2.40\,s + 9.954\,s$

$t_{T} = 12.354\,s$

The grinding wheel stop at t = 12.354 seconds.

c) The deceleration experimented by the grinding wheel was 8.780 radians per square second.

Answer from: Quest

Is there any opitions? if you have the periodic table, the noble gases are 8a family, the halogen are the 7a family, and the nonmetal are carbon, nitrogen, phosphorus, oxygen, sulfur, selenium, fluorine, chlorine, bromine, iodine and astatine.

Answer from: Quest

96.77 amp

explanation:

rl = 250/100 = 2.5 ohms.

egl = 250 + (100 × 0.1) + 2 = 262 v.

at 700 r.p.m., eg2 = 262 × 700/1000 = 183.4 v.

if ia is the new current, then eg2 - 2 - (ia × 0.1) = 2.5 ia

which means this will give ia = 96.77 amp.

Another question on Physics

Physics, 21.06.2019 22:20

Acave rescue team lifts an injured spelunker directly upward and out of a sinkhole by means of a motor-driven cable. the lift is performed in three stages, each requiring a vertical distance of 11.0 m: (a) the initially stationary spelunker is accelerated to a speed of 4.80 m/s; (b) he is then lifted at the constant speed of 4.80 m/s; (c) finally he is decelerated to zero speed. how much work is done on the 78.0 kg rescue by the force lifting him during each stage

Answers: 2

Answer

Physics, 22.06.2019 05:30

Astudent pushes on a 20.0 kg box with a force of 50 n at an angle of 30° below the horizontal. the box accelerates at a rate of 0.5 m/s2 across a horizontal floor. what is the value of the normal force on the box? 200 n 243 n 156 n 225 n

Answers: 2

Answer

Physics, 22.06.2019 09:40

(a) assume the equation x = at^3 + bt describes the motion of a particular object, with x having the dimension of length and t having the dimension of time. determine the dimensions of the constants a and b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.) (b) determine the dimensions of the derivative dx/dt = 3at^2 + b. (use the following as necessary: l and t, where l is the unit of length and t is the unit of time.)

Answers: 1

Answer

Physics, 22.06.2019 16:30

Write a polynomial function with the given zeros x= -1,0,2show your work

Answers: 3

Answer

You know the right answer?

At t=0 a grinding wheel has an angular velocity of 25.0 rad/s. It has a constant angular acceleratio...

Questions