subject
Physics, 21.07.2020 20:01 reeeeeee32

Electronic flash units for cameras contain a capacitor for storing the energy used to produce the flash. In one such unit, the flash lasts for a time interval of 1.50×10^−3 s with an average light power output of 2.90×10^5 W a) If the conversion of electrical energy to light has an efficiency of 90.0 % (the rest of the energy goes to thermal energy), how much energy must be stored in the capacitor for one flash?
b) The capacitor has a potential difference between its plates of 125 V when the stored energy equals the value calculated in part A. What is the capacitance?

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 04:10
An initially unpolarized light if intensity 500 w/m^2 passes through four polarizers. the transmission axis between adjacent polarizers is 45∘. what percentage of the initial intensity is transmitted by the system?
Answers: 2
question
Physics, 22.06.2019 08:50
You are a sales representative for a company that makes a new alternate fuel for vehicles. you have prepared a presentation for the environmental engineers to sell your new product. what question do you expect the audience to ask regarding whether the new fuel will cause less damage to the environment? a. do we have to change any parts of the vehicle to use this alternate fuel? b. will the vehicles get better fuel mileage with the alternate fuel? c. how much greenhouse gas does your fuel produce compared with current fuel sources? d. is the alternate fuel more expensive than fossil fuel?
Answers: 2
question
Physics, 22.06.2019 10:30
The uniform slender bar rests on a smooth horizon- tal surface when a force f is applied normal to the bar at point a. point a is observed to have an initial acceleration aa of 20 m/s2, and the bar has a corre- sponding angular acceleration of 18 rad /s2. deter- mine the distance b.
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
Electronic flash units for cameras contain a capacitor for storing the energy used to produce the fl...
Questions
question
Chemistry, 19.03.2020 05:39
question
Computers and Technology, 19.03.2020 05:40
question
History, 19.03.2020 05:40
Questions on the website: 13722360