Physics, 30.07.2020 01:01 hannahg9525
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and the temperature is 2150 K. Determine a) the compression ratio. b) the cutoff ratio. c) the thermal efficiency of the cycle. d) the mean effective pressure, in kPa.
Answers: 3
Physics, 22.06.2019 01:30
What is the magnitude of the resultant vector round your answer to the nearest tenth
Answers: 2
Physics, 22.06.2019 10:30
Carbon is allowed to diffuse through a steel plate 15 mm thick. the concentrations of carbon at the two faces are 0.65 and 0.30 kg c/m^3 fe, which are maintained constant. if the preexponential and activation energy are 6.2 x 10-7 m2 /s and 80,000 j/mol, respectively, compute the temperature at which the diffusion flux is 1.43 x 10^-9 kg/m^2 -s.
Answers: 3
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
The pressure and temperature at the beginning of compression of an air-standard Diesel cycle are 95...
English, 20.04.2020 19:55
Geography, 20.04.2020 19:55
Health, 20.04.2020 19:55
Mathematics, 20.04.2020 19:55
Health, 20.04.2020 19:55
Mathematics, 20.04.2020 19:55