An elastic circular bar is fixed at one end and attached to a rubber grommet at the other end. The grommet functions as a torsional spring with spring constant k. If a concentrated torque of magnitude Ta is applied in the center of the bar, what is the rotation at the end of the bar, φ(L)? Assume a constant shear modulus G and polar moment of inertia J.

2.1 rad(anticlockwise).

Explanation:

So, we are given the following data or parameters or information in the question above:

=> "The torsional stiffness of the spring support is k = 50 N m/rad. "

=> "If a concentrated torque of mag- nitude Ta = 500 Nm is applied in the center of the bar"

=> "L = 300 mm Assume a shear modu- lus G = 10 kN/mm2 and polar monnent of inertia J = 2000 mln"

Hence;

G × J = 10 kN/mm2 × 2000 mln = 20 Nm^2.

Also, L/2 = 300 mm /2 = 0.15 m (converted to metre).

==> 0.15/20 (V - w) + θ = 0.

==> 0.15/20 (V - w ) = -θ.

Where V = k = 50 N m/rad

w = 183.3 θ.

Therefore, w + Vθ = 500 Nm.

==> 183.3 + 50 θ = 500 Nm.

= 6.3

Anticlockwise,

θ = 2.1 rad.

i believe the answer would be:

d. violin, clarinet, french horn, and tuba

answer: the metamorphic rocks are formed when they are exposed to high pressure and high temperatures. this happens when one of the earth's plates comes in contact with the other plate by traveling in opposite directions, straight into each other or slipping under one another. the friction that is caused by this activity results in   melting of rocks and when it cools they are known as metamorphic rocks. this process needs a controlled amount of pressure and temperature otherwise it may turn into magma.