Physics, 17.08.2020 01:01 shaelynwolf326

PLEASE ASAP! I SENT A PHOTO CHECK AND TELL!

Answers: 3

Show answers

Another question on Physics

Physics, 22.06.2019 06:00

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

Answers: 3

Answer

Physics, 22.06.2019 17:40

A15.75-g piece of iron absorbs 1086.75 joules of heat energy, and its temperature changes from 25°c to 175°c. what is the specific heat capacity of iron?

Answers: 1

Answer

Physics, 23.06.2019 02:40

The two metal spheres in the figure are connected by a metal wire with w switch in the middle. initially the switch is open. sphere 1, with the larger radius, i'd given a positive charge. sphere 2, with the smaller radius, is neutral. then the switch is closed. afterward, sphere 1 has charge q1, is at potential v1 and the electric field strength at its surface is e1. the values for sphere 2 are q2, v2, and e2. a. is v1 < ,> , or = to v2? explain. b. is q2 < , > , or = explain? c. is e1 < ,> ,or = to e2? explain?

Answers: 1

Answer

Physics, 23.06.2019 03:00

Suppose that a cylindrical tank 6 meters high with a radius of 2 meters is filled to the rim with water. the tank is buried so that the top of the tank is 1 meter below ground level. the space above the tank is not filled with water. calculate how much work needs to be done by a pump to pump the water out of the tank up to ground level. (the water weighs 9,800 newtons per cubic meter.)

Answers: 2

Answer

You know the right answer?

PLEASE ASAP! I SENT A PHOTO CHECK AND TELL!
...

Questions