Physics, 28.08.2020 21:01 neariah24

Effciency of a lever is never 100% or more. why?Give reason

Answers: 1

Show answers

Answers

Answer from: hmock65

Ideally, the work output of a lever should match the work input. However, because of resistance, the output power is nearly always be less than the input power. As a result, the efficiency would go below $100\%$ .

Explanation:

In an ideal lever, the size of the input and output are inversely proportional to the distances between these two forces and the fulcrum. Let $D_\text{in}$ and $D_\text{out}$ denote these two distances, and let $F_\text{in}$ and $F_\text{out}$ denote the input and the output forces. If the lever is indeed idea, then:

$F_\text{in} \cdot D_\text{in} = F_\text{out} \cdot D_\text{out}$ .

Rearrange to obtain:

$\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}$

Class two levers are levers where the perpendicular distance between the fulcrum and the input is greater than that between the fulcrum and the output. For this ideal lever, that means $D_\text{in} D_\text{out}$ , such that $F_\text{in} < F_\text{out}$ .

Despite $F_\text{in} < F_\text{out}$ , the amount of work required will stay the same. Let $s_\text{out}$ denote the required linear displacement for the output force. At a distance of $D_\text{out}$ from the fulcrum, the angular displacement of the output force would be $\displaystyle \frac{s_\text{out}}{D_\text{out}}$ . Let $s_\text{in}$ denote the corresponding linear displacement required for the input force. Similarly, the angular displacement of the input force would be $\displaystyle \frac{s_\text{in}}{D_\text{in}}$ . Because both the input and the output are on the same lever, their angular displacement should be the same:

$\displaystyle \frac{s_\text{in}}{D_\text{in}} =\frac{s_\text{out}}{D_\text{out}}$ .

Rearrange to obtain:

$\displaystyle s_\text{in}=s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}$ .

While increasing $D_\text{in}$ reduce the size of the input force $F_\text{in}$ , doing so would also increase the linear distance of the input force $s_\text{in}$ . In other words, $F_\text{in}$ will have to move across a longer linear distance in order to move $F_\text{out}$ by the same $s_\text{out}$ .

The amount of work required depends on both the size of the force and the distance traveled. Let $W_\text{in}$ and $W_\text{out}$ denote the input and output work. For this ideal lever:

$\begin{aligned}W_\text{in} &= F_\text{in} \cdot s_\text{in} \\ &= \left(F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}}\right) \cdot \left(s_\text{out} \cdot \frac{D_\text{in}}{D_\text{out}}\right) \\ &= F_\text{out} \cdot s_\text{out} = W_\text{out}\end{aligned}$ .

In other words, the work input of the ideal lever is equal to the work output.

The efficiency of a machine can be measured as the percentage of work input that is converted to useful output. For this ideal lever, that ratio would be $100\%$ - not anything higher than that.

On the other hand, non-ideal levers take in more work than they give out. The reason is that because of resistance, $F_\text{in}$ would be larger than ideal:

$\displaystyle F_\text{in} = F_\text{out} \cdot \frac{D_\text{out}}{D_\text{in}} + F(\text{resistance})$ .

As a result, in real (i.e., non-ideal) levers, the work input will exceed the useful work output. The efficiency will go below $100\%$ ,

Answer from: Quest

Answer mechanical energy;

Answer from: Quest

Lexy is correct because angle r is between the incident wave, n = 0, and a diffracted wave.

Another question on Physics

Physics, 21.06.2019 20:20

Two friends are having a conversation. anna says a satellite in orbit is in freefall because the satellite keeps falling toward earth. tom says a satellite in orbit is not in freefall because the acceleration due to gravity is not 9.80 m/2 . who do you agree with and why?

Answers: 1

Answer

Physics, 22.06.2019 04:00

Determine the maximum r-value of the polar equation r =3+3 cos 0

Answers: 3

Answer

Physics, 22.06.2019 13:00

At a certain instant after jumping from the airplane a, a skydiver b is in the position shown and has reached a terminal (constant) speed vb = 52 m/s. the airplane has the same constant speed va = 52 m/s, and after a period of level flight is just beginning to follow the circular path shown of radius ρa = 2330 m. (a) determine the velocity and acceleration of the airplane relative to the skydiver. (b) determine the time rate of change of the speed vr of the airplane and the radius of curvature ρr of its path, both as observed by the nonrotating skydiver.

Answers: 3

Answer

Physics, 22.06.2019 14:40

What is the orbital period of a spacecraft in a low orbit near the surface of mars? the radius of mars is 3.4×106m.

Answers: 2

Answer

You know the right answer?

Effciency of a lever is never 100% or more. why?Give reason...

Questions