Physics, 31.08.2020 01:01 jaydahh4059
answers If the motor is to accelerate the elevator car upward at 1.8 m/s2, how much torque must it generate
Answers: 2
Physics, 22.06.2019 05:10
Total solidification times of three casting geometries are to be compared: a sphere, a cylinder, in which the length-to-diameter ration - 1.0, and a cube. volume = 1000 cm^3 for all three shhapes, and the same casting alloy is used. a) determine the solidification times of each geometry b) based on the results of part (a), which geometric element would make the best riser? c) if the mold constant = 3.5 min/cm^2 in chvorinov's rule, compute the total solidification time for each casting.
Answers: 3
Physics, 22.06.2019 13:40
Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.
Answers: 1
Physics, 22.06.2019 16:40
The astronauts on the space shuttle flights experienced an acceleration of 29 m/s2 (about 3 "g's") during lift-off. what upward force must the astronaut's seat apply to the astronaut in order to cause this acceleration? assume the astronaut's mass is 70 kg, and compute this force when the acceleration is near the earth's surface so their weight equals latex: mg m g .
Answers: 3
answers If the motor is to accelerate the elevator car upward at 1.8 m/s2, how much torque must it g...
Geography, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Chemistry, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Physics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00
World Languages, 12.11.2020 14:00
Mathematics, 12.11.2020 14:00