a student has a saturated solution of kcl at 60 C how much solute would he need if he wanted to make 200 ml of the solution at 60 C

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

unbalanced force

explanation:

we have been given a quadratic function and we need to restrict the domain such that it becomes a one to one function.

we know that vertex of this quadratic function occurs at (5,2).

further, we know that range of this function is .

if we restrict the domain of this function to either or , it will become one to one function.

let us know find its inverse.

upon interchanging x and y, we get:

let us now solve this function for y.

hence, the inverse function would be if we restrict the domain of original function to and the inverse function would be if we restrict the domain to .