Physics, 09.10.2020 04:01 ghernadez

Which is the process by which a solid changes to a liquid? condensation
evaporation
melting
sublimation

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 16:00

Your pendulum clock which advances 1.0 s for every complete oscillation of the pendulum is running perfectly on earth at a site where the magnitude of the acceleration due to gravity is 9.80 m/s2. you send the clock to a location on the moon where the magnitude of the acceleration due to gravity is 1.65 m/s2.

Answers: 2

Answer

Physics, 22.06.2019 17:00

The chart shows the costs and shipping times for materials that a company needs to build a new product. which describes the best trade-off if the company needs to start building their product within the next two years? they should order the domestic materials because it is always best to choose the fastest shipping time. they should order the imported materials because it is always best to choose the lowest cost for materials. since the shipping time is longer, they should order the domestic materials because the additional cost is worth it to get the materials in time. even though the shipping time is longer, they should order the imported materials because they are less expensive and should arrive in plenty of time to build the product.

Answers: 1

Answer

Physics, 22.06.2019 18:00

Air enters a gas turbine with two stages of compression and two stages of expansion at 100 kpa and 17°c. this system uses a regenerator as well as reheating and intercooling – the intercooler returns the air to the inlet temperature. the pressure ratio across each compressor is 4 ; 300 kj/kg of heat are added to the air in each combustion chamber; and the regenerator operates perfectly while increasing the temperature of the cold air by 20°c. determine the system’s thermal efficiency. assume isentropic operations for all compressor and the turbine stages and use constant specific heats at room temperature. (0.378)

Answers: 3

Answer

Physics, 23.06.2019 10:10

Now that we have a feel for the state of the circuit in its steady state, let us obtain the expression for the current in the circuit as a function of time. note that we can use the loop rule (going around counterclockwise): e−vr−vl=0. note as well that vr=ir and vl=ldidt. using these equations, we can get, after some rearranging of the variables and making the subsitution x=er−i, dxx=−rldt. integrating both sides of this equation yields x=x0e−rt/l. use this last expression to obtain an expression for i(t). remember that x=er−i and that i0=i(0)=0. express your answer in terms of e, r, and l. you may or may not need all these variables. use the notation exp(x) for ex.

Answers: 1

Answer

You know the right answer?

Which is the process by which a solid changes to a liquid? condensation
evaporation
m...

Questions