A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40°C at a rate of 1100 m3/min and leaves the turbine at 650°C. Assume a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent. Use constant specific heats with cv = 0.821 kJ/ kg·K, cp = 1.108 kJ/kg·K, and k = 1.35.

The low lands i believe

When seismic waves hit a fault, the waves are reflected off the fault. seismograph can detect these reflected seismic waves. geologists then use these data to map the fault's length and depth

Answerthe energy required is 1.60 × 10⁻¹⁸ j, to three significant figures.explanationwe define electric potential as the ratio electric potential energy to the charge,    then the following gives us the potential difference,      the formula  may be on your formula sheet.the change in electric potential energy would be the energy that would needed to move it from point a to point b. solving for that, we get    using q = 8.00  × 10⁻¹⁹ c and  δv = 2.00 v, we get    the energy required is 1.60 × 10⁻¹⁸ j, to three significant figures.