A diffusion couple, made by welding a thin onecentimeter square slab of pure metal A to a similar slab of pure metal B, was given a diffusion anneal at an elevated temperature and then cooled to room temperature. On chemically analyzing successive layers of the specimen, cut parallel to the weld interface, it was observed that, at one position, over a distance of 5000 nm, the atom fraction of metal A, NA, changed from 0.30 to 0.35. Assume that the number of atoms per m3 of both pure metals is 9 x 10^28. First determine the concentration gradient dnA/dx. Then if the diffusion coefficient, at the point in question and annealing temperature, was 2 10^-14 m^2/s. Required:
Determine the number of A atoms per second that would pass through this cross-section at the annealing temperature.

The value  is    

Explanation:

From the question we are told that

  The atom fraction of metal A at point G is

   The atom fraction of metal  A at a distance 5000nm from G is  

   The number of atoms per is    

    The diffusion coefficient is  

Generally of the concentration of atoms of metal A at G is  

=>    

=>    

Generally of the concentration of atoms of metal A at a distance 5000nm from G is  

=>    

The concentration gradient is mathematically represented as

=>  

=>    

Generally the flux of the atoms per unit  area according to Fick's Law  is mathematically represented as

=>    

=>    

Generally if the cross-section area is

Generally the number of atom crossing the above area  per second is mathematically is  

=>    

current and voltage can both be different in different parts of a circuit so it matters where you place the ammeter and voltmete

the temperature in kelvin of 2.0 dm3 of an ideal gas is doubled and its pressure is increased by a factor of four. what is the final volume of the gas