Physics, 21.10.2020 16:01 MSSTEALYOGURL3757

you have been asked to design a solar collectors installed in South Florida on top of a roof for which the incoming radiation is 380 Btu/hr. sq. Ft you need to maintain a temperature of a water heater tank at 120 F at all time to be used for heating purpose. The tank is 1000 gallon and placed in the garage. Find the minimum required collector surface area that can maintain the temperature at coldest day in South Florida. Also if for three days in row the weather is cloudy and the incoming irradiation reduced to 210 Btu/hr sq. ft how long it will take the tank temperature to reduce to the of outside garage temperature. Make all assumptions that is necessary. Show step by step your solution and upload as a file if you have difficulty to type here.

Answers: 3

Show answers

Another question on Physics

Physics, 21.06.2019 14:10

Amachinist needs to remove a tight fitting pin of material a from a hole in a block made of material b. the machinist heats both the pin and the block to the same high temperature and removes the pin easily. what statement relates the coefficient of thermal expansion of material a to that of material b? a) the situation is not possible, heating block b will shrink the hole in the material as the material expands with increasing temperatureb) material b has the same coefficient of expansion as does material ac) material b has a negative coefficient of expansion and a has a positive coefficient of expansiond) material a has a greater coefficient of expansion than does material be) material b has a greate

Answers: 1

Answer

Physics, 21.06.2019 17:00

Which of the following is considered to be a vector? a. temperature b. velocity c. time d. mass

Answers: 1

Answer

Physics, 22.06.2019 10:20

Asmall object with mass 0.200 kg swings back and forth on the lower end of a light rope that is 3.00 m long. the upper end of the rope is attached to the ceiling. as the object swings through its lowest position, where the rope is vertical, the speed of the object is 5.80 m/s. at this point in the motion, what is the tension in the rope? (use g = 9.80 m/s2.)

Answers: 2

Answer

Physics, 22.06.2019 14:10

Match these items. 1. coulombs __force 2. ohms __emf 3. centimeters __resistance 4. newtons __charge 5. volts __length

Answers: 1

Answer

You know the right answer?

you have been asked to design a solar collectors installed in South Florida on top of a roof for whi...

Questions