subject
Physics, 29.10.2020 19:50 joleiswan9919

The average velocity and time of motion for an objects are recorded as Vavg = +2.0 m/s. Ai= 3.0 s
What is the displacement of the object?
O 0.67 m
O 6m
o 3m
O 1.5 m

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 19:30
A33.1 g copper object is launched from a 1.5 m 30° steel incline positioned on the floor by being pulled up a string attached to a 50.0 g mass suspended vertically over a pulley. the object is projected towards a glass table where it lands when it is at the point along its trajectory with the lowest speed. it comes to a halt when it clears the opposite edge of the table. it then falls and lands on 9 physics texts each 5 cm thick that are stacked on the floor on the opposite side of the table. assume that the table does not have a ledge and the rectangular object experiences 0.05 n of air resistance as it falls towards the books. how far and how long did the object travel and how fast does it hit the books. assume that at the moment the copper object leaves the incline, the massless string and ideal pulley break off
Answers: 2
question
Physics, 22.06.2019 03:30
Using a wheel and axle, a farmer is trying to lift a bucket of water from the bottom of a well. the larger wheel has a radius of 40 cm compared to the axle that has a radius of 10 cm. if a bucket of water is 50 n, then how much effort is required to raise it? 12.5 n 200 n 2 n 500 n
Answers: 1
question
Physics, 22.06.2019 04:50
Describe the function of the endomembrane system? what organelles are involved?
Answers: 3
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
You know the right answer?
The average velocity and time of motion for an objects are recorded as Vavg = +2.0 m/s. Ai= 3.0 s
Questions
question
Biology, 22.06.2021 22:40
question
Mathematics, 22.06.2021 22:40
question
Chemistry, 22.06.2021 22:40
Questions on the website: 13722361