A circular loop of flexible iron wire has an initial circumference of 161 cm , but its circumference is decreasing at a constant rate of 11.0 cm/s due to a tangential pull on the wire. The loop is in a constant uniform magnetic field of magnitude 0.800 T , which is oriented perpendicular to the plane of the loop. Assume that you are facing the loop and that the magnetic field points into the loop.

Complete question is;

A circular loop of flexible iron wire has an initial circumference of 161 cm , but its circumference is decreasing at a constant rate of 11.0 cm/s due to a tangential pull on the wire. The loop is in a constant uniform magnetic field of magnitude 0.800 T , which is oriented perpendicular to the plane of the loop. Assume that you are facing the loop and that the magnetic field points into the loop.

Find the emf induced in the loop, at the instant when 9.0s has passed.

Magnitude of EMF induced = 0.008686 V

Explanation:

We are given;

Initial circumference; C = 161 cm

rate of decrease of circumference; dC/dt = 11 cm/s

magnetic field; B = 0.8 T

time; t = 9 sec

To find emf in loop, we'll use the formula;

EMF = -d(BAcosθ)/dt

Now, we are told magnetic field is uniform, thus angle is zero.

Thus;

EMF = -d(BAcos0)/dt

cos 0 = 1

Thus;

EMF = -B(dA/dt)

so area will be

Area of the loop is (πr²)

Thus;

dA/dt = d(πr²)/dt

Differentiating with respect to r, we have;

dA/dt = 2πr(dr/dt)

Formula for circumference is;

C = 2πr

Making r the subject, we have;

r = C/2π

Thus;

R = 161/2π

r = 25.6239 cm

c is circumference so from equation 2

From EMF = -B(dA/dt) , let's replace dA/dt with 2πr(dr/dt) since dA/dt = 2πr(dr/dt)

Thus;

EMF = -2πrB(dr/dt)

From C = 2πr, we can derive the rate of increase in radius.

Thus;

dC/dt = 2π(dr/dt)

Plugging in the relevant values, we have;

dr/dt = 11/2π = 1.75 cm/s

At the instance when 9 s has passed, radius of the could is now;

r1 = r - 9(dr/dt)

r1 = 25.6239 - 9(1.75)

r1 = 9.8739 cm

We will need to plug in 0.8 for B, 9.8739 cm for r, 1.75 cm/s for dr/dt into;

EMF = -2πrB(dr/dt)

But, we have to convert cm to m.

Thus: 9.8739 cm = 9.8739 × 10^(-2) m

1.75 cm = 0.0175 m

Thus;

EMF = -2π × 9.8739 × 10^(-2) × 0.8 × 0.0175

EMF = -0.008686 V

For magnitude of emf, we will take the absolute value.

Thus;

Magnitude of EMF = 0.008686 V

i am single too don't feel bad

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water