Length of table is 1.0m,1.00m and 1.000m. Which one is more accurate?

1.00 m is a more accurate measured length.

Explanation:

Denote length of the table by L.

For L=1.0 m, there is one significant digit after the decimal.

Care 1: When one more significant digit after decimal considered, the exact number can be from 0.95 to 1.05.

So, the possible span of error

For L=1.00 m, there is two significant digits after the decimal.

Case 2: When one more significant digit after decimal considered, the exact number can be from 0.095 to 1.005.

So, the possible span of error

Case 3: For L=1.000 m, there is three significant digits after the decimal.

When one more significant digit after decimal considered, the exact number can be from 0.0095 to 1.0005.

So, the possible span of error

As

So, the least error is in the third case when L=1.00m, hence, L= 1.00m is more accurate.

if the thermos has a vacuum innner, then heat through conv currents and conduction are reduced = vacuum flask

a solenoid is created by wrapping a l = 90 m long wire around a hollow tube of diameter d = 4.5 cm.   the wire diameter is d = 0.9 mm.   the solenoid wire is then connected to a power supply so that a current of i = 9 a flows through the wire.

randomized variablesl = 90 m

d = 4.5 cm

d = 0.9 mm

i = 9 a                                          

write an expression for the number of turns, n, in the solenoid. you do not need to take into account the diameter of the wire in this calculation.

calculate the number of turns, n, in the solenoid.

write an expression for the length of the solenoid (l2) in terms of the diameter of the hollow tube d.

calculate the length of the solenoid (l2)   in meters.

calculate the magnitude of the magnetic field at the center of the solenoid in teslas.

explanation: