the second hand on a clock has the length of .0800 metres. The centripetal acceleration of the tip of the second hand is

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

An electron and a proton have the same kinetic energy upon entering a region of constant magnetic field and their velocity vectors are perpendicular to the magnetic field. suppose the magnetic field is strong enough to allow the particles to circle in the field. note: you'll need to look up the masses for an electron and proton. 1) what is the ratio of the radii of their circular paths rp/re?

Zeros that follow non-zeros numbers and are also to the right of a decimal point are significant