A 3 cm tall object is placed 2 cm to the left of a converging lens that has a focal length with a magnitude of 4 cm. A diverging lens with a focal length of magnitude 8 cm is placed 10 cm to the right of the first lens. What is the magnification of the final image produced by these two lenses? Make sure you say whether it is bigger/smaller and upright/inverted.

We all use gps today, even if we don't drive yet. i bet you have been in the car with a parent and they have asked you to get out your phone to find a specific location. in your car, on the phone, you are using a very sophisticated technology. gps satellites circle the earth twice a day in a very precise orbit and transmit signal information to earth. gps receivers take this information and use trilateration to calculate the user's exact location. essentially, the gps receiver compares the time a signal was transmitted by a satellite with the time it was received. the time difference tells the gps receiver how far away the satellite is. now, with distance measurements from a few more satellites, the receiver can determine the user's position and display it on the unit's electronic map. what type of signal is utilized by the gps satellite?

The frequency of vibrations of a vibrating violin string is given by f = 1 2l t ρ where l is the length of the string, t is its tension, and ρ is its linear density.† (a) find the rate of change of the frequency with respect to the following. (i) the length (when t and ρ are constant) (ii) the tension (when l and ρ are constant) (iii) the linear density (when l and t are constant) (b) the pitch of a note (how high or low the note sounds) is determined by the frequency f. (the higher the frequency, the higher the pitch.) use the signs of the derivatives in part (a) to determine what happens to the pitch of a note for the following. (i) when the effective length of a string is decreased by placing a finger on the string so a shorter portion of the string vibrates df dl 0 and l is ⇒ f is ⇒ (ii) when the tension is increased by turning a tuning peg df dt 0 and t is ⇒ f is ⇒ (iii) when the linear density is increased by switching to another string df dρ 0 and ρ is ⇒ f is ⇒

The experiment done in lab is repeated, using a ball that has unknown mass m. you plot your data in the form of f 2 versus m/l, with f in rev/s, m in kg, and l in m. your data falls close to a straight line that has slope 3.19 m/(kg · s2). use g = 9.80 m/s2 and calculate the mass m of the ball.