A stone is dropped into a deep well and is heard to hit the water 15.53 s after being dropped. a) Determine the depth of the well. Show your work.

b) How fast is the stone travelling right before it hits the water? Show your work.
C) Assume that the stone is being dropped on Planet X, where the magnitude of the acceleration due to gravity is greater than, less than or the same as on earth? Which one is it and why?

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

i think if it were me i whould divide 300 dide 15

step-by-step explanation:

another example of kinetic energy would be,

kinetic energy   >     moving energy

answer   >   letter choice (c),   a hammer falling off a table.

hope that !                                         : )