1 In the experiment shown in Figure 1,0.024 kg of water was collected in the beaker in 300 s with the heater turned off. The beaker was
then emptied and placed under the funnel again. With the heater
on for exactly 300s, the joulemeter reading increased from zero to
15000 J, and 0.068 kg of water was collected in the beaker.
a Calculate the mass of ice melted because of the
heater being on
b Use the data to calculate the specific latent heat of
fusion of water

1. how much energy is needed to raise the temperature of 40.0 g of argon from 25c to 40c? the specific heat capacity of argon is 0.520 j/(g·k) 2a. 23.0 ml of 0.100 m hcl (standard) are added from a buret to neutralize 50.0 ml of an unknown basic solution. 2b. if the oh- produced in the previous reaction came from ca(oh)2, then what is the molarity of the ca(oh)2? 3.calculate the new freezing-point of a solution when 60.5 grams of cacl2 solute is dissolved in 0.612 kg of water. 4. what is the maximum number of moles of alcl3 that can be produced from 5.0 mol al and 6.0 mol cl2? 5. a sample of oxygen gas has a volume of 150 ml when its pressure is 0.923 atm. if the pressure is increased to 0.987 atm and the temperature remains constant, what will the new volume be? 6. nitrogen gas in a closed container at a temperature of 100.0 oc and 3.0 atm is heated to 300 oc. what is the pressure of the gas at the higher temperature?

Ascientist wants to test ways to reduce pollution in lake . what is the bestway of doing this

Suppose that a cylindrical tank 6 meters high with a radius of 2 meters is filled to the rim with water. the tank is buried so that the top of the tank is 1 meter below ground level. the space above the tank is not filled with water. calculate how much work needs to be done by a pump to pump the water out of the tank up to ground level. (the water weighs 9,800 newtons per cubic meter.)