A submarine rests on the sea bottom. The normal force exerted upon the sub by the sea-floor is equal toA) the weight of the sub less the weight of the displaced water. B) the weight of the displaced water. C) the weight of the sub plus the weight of the displaced water. D) the buoyant force less 1 atmosphere acting on the sub. E) the weight of the sub.

Acylindrical specimen of a nickel alloy having an elastic modulus of 207 gpa (30 × 106psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation when a tensile load of 8900 n (2000 lbf) is applied. compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010 in.)

Na food processing facility, a spherical container of inner radius r1 5 40 cm, outer radius r2 5 41 cm, and ther- mal conductivity k 5 1.5 w/m · k is used to store hot water and to keep it at 100°c at all times. to accomplish this, the outer surface of the container is wrapped with a 800-w electric strip heater and then insulated. the temperature of the inner surface of the container is observed to be nearly 120°c at all times. as- suming 10 percent of the heat generated in the heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the container, (b) obtain a relation for the variation of temperature in the container material by solving the differential equation, and (c) evaluate the outer surface tempera- ture of the container. also determine how much water at 100°c this tank can supply steadily if the cold water enters at 20°c.

Which of the following is a characteristic shared by both electron and light microscopes? a. they both employ the use of objective lenses. b. both microscopes require an internal camera to visualize the specimen. c. both microscopes have a resolving power of 0.01 nm. d. they both utilize white light to magnify the specimen.