How do density, pressure, and temperature change as the depth of Earth increases? Question 5 options: Density, pressure, and temperature all increase as you go deeper into the Earth. Density, pressure, and temperature all decrease as you go deeper into the Earth. Density decreases, and pressure and temperature increase as you go deeper into the Earth. Density and pressure decrease, and temperature decreases as you go deeper into the Earth.

Sara is creating an experiment. her hypothesis states the following. if i increase the air in my tires, then i will get better gas mileage. if this is her hypothesis what column titles do we need in our date table? a. air pressure in tire (psi) and gas mileage (mph) b. air pressure in the atmosphere (psi) and gas mileage (mph) c. miles (m) and gallons per mile (g) d. old battery and new battery

Atwo-stage air compressor operates at steady state, compression 10m^3/min of air from 100 kpa and 300k to 1200 kpa. an intercooler between the two stages cools the air to 300k at a constant pressure of 350 kpa. the compression processes are isentropic. a) calculate the power required to run the compressor, in kw b) compare the result to the power required for isentropic compression from the same inlet state to the same final pressure.

5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?