Physics, 21.09.2019 04:00 paige5horses2000

Aparticle undergoes two displacements. the first has a
magnitude of 150 cm and makes an angle of 120° with
the positive x axis. the resultant displacement has a magnitude
of 140 cm and is directed at an angle of 35.0° to
the positive x axis. find the magnitude and direction of
the second displacement.

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 19:40

Uranium has two naturally occurring isotopes. 238u has a natural abundance of 99.3% and 235u has an abundance of 0.7%. it is the rarer 235u that is needed for nuclear reactors. the isotopes are separated by forming uranium hexafluoride uf6, which is a gas, then allowing it to diffuse through a series of porous membranes. 235uf6 has a slightly larger rms speed than 238uf6 and diffuses slightly faster. many repetitions of this procedure gradually separate the two isotopes. what is the ratio of the rms speed of 235uf6 to that of 238uf6? express your answer to five significant figures.

Answers: 3

Answer

Physics, 23.06.2019 01:30

Aplane's average speed between two cities is 600 km/h. if the trip takes 2.5 hours, how far does the plane fly?

Answers: 2

Answer

Physics, 23.06.2019 07:00

I) a gas contained within a piston-cylinder assembly undergoes two processes, a and b, between the same end states, 1 and 2, where p1 = 10 bar, v1 = 0.1 m3 , u1 = 400 kj and p2 = 1 bar, v2 = 1.0 m3 , u2 = 200 kj: ' process a: process from 1 to 2 during which the pressure-volume relation is pv = constant. ' process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to state 2. kinetic and potential energy effects can be ignored. for each of the processes a and b, a) sketch the process on a p-v diagram. b) evaluate the work, in kj. c) evaluate the heat transfer, in kj.(ans : qb,12 = -65.0 kj)

Answers: 3

Answer

Physics, 23.06.2019 07:30

Aspring has a relaxed length of 33 cm (0.33 m) and its spring stiffness is 6 n/m. you glue a 76 gram block (0.076 kg) to the top of the spring, and push the block down, compressing the spring so its total length is 15 cm. you make sure the block is at rest, then at time t=0 you quickly move your hand away. the block begins to move upward, because the upward force on the block by the spring is greater than the downward force on the block by the earth. calculate y vs. time for the block during a 0.09-second interval after you release the block, by applying the momentum principle in three steps each of 0.03-second duration.

Answers: 1

Answer

You know the right answer?

Aparticle undergoes two displacements. the first has a
magnitude of 150 cm and makes an angle...

Questions