1. According to Figure 1, for any submersion time after 0 days, what is the order of the 4 deicers, from the
deicar that produced the greatest average percent
change in cylinder leagth to the deicer that produced
the least average percent change in cylinder length?
A. Ca(OH), NaCl, CaCl, MgCl,
B. Ca(OH. NaCl. Mach.. CCL
C. MzCb, CaCl, NaCl, CaOH,
D. MgClNaCl, CaCl, Ca(OH),

For problems 1-3, consider a simple dc brush motor with a permanent magnet stator. with an an consider a simple dc brush motor with a permanent magnet ae supply voltage of 100 v, the no-load speed of the motor is 1000 rpm. this motor can provide a torque of 1.9 n-m at 800 rpm drawing a current of 2 a current are both zero at no load.) 1. with an armature supply voltage of 100 v, the motor is operated at 900 rpm. what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input? what is the energy efficiency of the motor? with an armature supply voltage of 100 v, the motor is operated at 1100 rpm (where it acts as a generator). what torque input is required? what mechanical power is required what current is generated? what is the electrical power generated? what is the energy efficiency of the motor acting as a generator? 2. with an armature supply voltage raised to 120 v, the motor is operated at 1000 rpm. what is the no-load speed? what is the motor torque? what is the mechanical power delivered by the motor? what is the current draw? what is the electrical power input what is the energy efficiency of the motor? 3.

What would be the result of an alpha particle coming into a magnetic field? a) the alpha particle will stop moving. b) the alpha particle will reverse its direction. c) the alpha particle will be deflected in a curve path. d) the alpha particle will continue to travel in a straight line.

When the displacement of a mass on a spring is 12a the half of the amplitude, what fraction of the mechanical energy is kinetic energy? at what displacement, as a fraction of a, is the mechanical energy half kinetic and half potential?