subject
Physics, 27.12.2020 04:40 wdw52001

The speed of a bobsled is increasing, because it has an acceleration of 2.44 m/s2. At a given instant in time, the forces resisting the motion, including kinetic friction and air resistance, total 595 N. The mass of the bobsled and its riders is 315 kg. (a) What is the magnitude of the force propelling the bobsled forward

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 22:30
A1200 kg car traveling north at 10 m/s is rear-ended by a 2000 kg truck traveling at 30 m/s. what is the total momentum before and after the collision?
Answers: 3
question
Physics, 21.06.2019 23:30
Classify the following soils according to the uscs classification system. provide appropriate uscs designations. a) this sample of well-graded gravel with sand was obtained from a large earthen dam in vancouver, canada. the sample has 73% fine to coarse sub-angular gravel, 25% fine to coarse sub-angular sand and 2% fines. the maximum size of the particles is 75 mm. the coefficient of curvature is 2.7, while the uniformity coefficient is 12.4. b) this dark brown and wet soil with a “strong organic odor” has 100% passing the no. 200 sieve. the liquid limit of the material is 32% when not dried and is 21% when oven-dried. the plastic index is 21% when not dried. c) this sand has 61% predominantly fine sand, 23% silty fines, and 16% fine sub-rounded gravel size. the maximum size is 20 mm. the liquid limit is 33% and the plastic limit is 27%. d) this soil has 74% fine to coarse sub-angular reddish sand and 26% organic and silty dark brown fines. the liquid limit is 37% when not dried and is 26% when oven dried. the plastic index is 6% when not dried.
Answers: 1
question
Physics, 22.06.2019 06:30
Apebble is thrown into a calm lake, ripples are formed from the center and move outward. the water particles in the lake travel in a circular pattern that moves up and down on the surface of a lake, and the energy travels a) diagonally. b) downward. c) horizontally. d) upward.
Answers: 2
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
The speed of a bobsled is increasing, because it has an acceleration of 2.44 m/s2. At a given instan...
Questions
question
Mathematics, 07.02.2021 14:00
question
Mathematics, 07.02.2021 14:00
question
Mathematics, 07.02.2021 14:00
question
Mathematics, 07.02.2021 14:00
question
Social Studies, 07.02.2021 14:00
Questions on the website: 13722361