subject
Physics, 28.12.2020 20:30 lexibyrd120

g A rotating wheel requires 5.00 s to rotate 28.0 revolutions. Its angular velocity at the end of the 5.00-s interval is 96.0 rad/s. What is the constant angular acceleration (in rad/s) of the wheel

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 05:50
Astudent wears sunglasses to her read a book more easily which wave interaction occurs as light passes from the air into the plastic lenses? a polarization b.refraction c.diffraction d. interference
Answers: 1
question
Physics, 22.06.2019 10:00
How are the crust and the inner core alike? a) they are both solid. b) they both have the same temperature. c) they are both under the same pressure. d) they are both very close to the center of the earth.
Answers: 1
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
question
Physics, 22.06.2019 13:40
An ideal otto cycle has a compression ratio of 10.5, takes in air at 90 kpa and 40°c, and is repeated 2500 times per minute. using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kw of power.
Answers: 2
You know the right answer?
g A rotating wheel requires 5.00 s to rotate 28.0 revolutions. Its angular velocity at the end of th...
Questions
question
Mathematics, 07.10.2019 08:50
question
Computers and Technology, 07.10.2019 08:50
question
History, 07.10.2019 08:50
question
Spanish, 07.10.2019 08:50
Questions on the website: 13722367