Physics, 08.01.2021 03:10 axonify

(BRAINLIEST) Which is an example of the force of attraction between two objects that have mass?

Magnetism
Gravity
Solar energy
Electricity
(BRAINLIEST)

Answers: 1

Show answers

Answers

Answer from: jazzy4211

Gravity

because it's factorised by mass of a body.

For other forces, they deal with charges of negligible mass and weights

Answer from: Quest

russian is not my first language, so i'm afraid i can't write out an answer in russian, but hopefully you can find a way to do so. here's my best translation of the problem: you're given a plot of a particle's position in one-dimensional space over time, and you're asked to find either the total distance traveled by the particle after 6 seconds had elapsed, or the total displacement of the particle after 6 seconds.

if you want the total distance traveled, you would first need to determine the particle's velocity as a function of time, then integrate that over the 6-second interval. we know the position function is quadratic with roots at 0 and 6, so we have

$x(t)=ax(x-6)$

where $a$ is unknown. because the position is parabolic, there is symmetry about the midpoint at $t=3$ , and we know that

$x(3)=10\implies -9a=10\implies a=-\dfrac{10}9$

so that the position function is

$x(t)=-\dfrac{10}9x(x-6)$

which means the velocity is

$v(t)=\dfrac{\mathrm dx}{\mathrm dt}=-\dfrac{20}9x+\dfrac{60}9$

then the total distance traveled is

$\displaystyle\int_{t=0}^{t=6}|v(t)|\,\mathrm dt=\left\{\int_{t-0}^{t=3}-\int_{t=3}^{t=6}\right\}v(t)\,\mathrm dt=20$

so the total distance traveled is 20 m.

on the other hand, if you want to find displacement: the particle starts at $x=0$ and ends at $x=0$ , so its displacement is 0.

Answer from: Quest

force is based upon mass and acceleration.the statement is not always true.

it can be explained from newton's second law of motion.

as per newton's second law of motion the rate of change of momentum is directly proportional to the applied force and takes place along the direction of force.

mathematically it can be written as -

$f\alpha \frac{dp}{dt}$

⇒ $f= k \frac{dp}{dt}$

here k is the proportionality constant whose value is 1.

$f=\frac{dp}{dt}$

$f= \frac{d[mv]}{dt}$

$f= m\frac{dv}{dt} +v\frac{dm}{dt}$

$f=ma+v\frac{dm}{dt}$ [a is the acceleration=dv/dt]

hence we see that force not only depends on mass and acceleration but also on velocity and rate of change of mass. force f will depend on mass and acceleration only when mass is constant.

hence the statement that force is based upon mass and acceleration is false.

Another question on Physics

Physics, 21.06.2019 20:50

Identify the type of synthetic material used in each object

Answers: 1

Answer

Physics, 22.06.2019 01:10

Suppose that two tanks, 1 and 2, each with a large opening at the top, contain different liquids. a small hole is made in the side of each tank at the same depth 1.57 m below the liquid surface, but the hole in tank 2 has 2.49 times the cross-sectional area of the hole in tank 1. (a) what is the ratio ρ1/ρ2 of the densities of the liquids if the mass flow rate is the same for the two holes? (b) what is the ratio rv1/rv2 of the volume flow rates from the two tanks? (c) at one instant, the liquid in tank 1 is 14.9 cm above the hole. if the tanks are to have equal volume flow rates, what height above the hole must the liquid in tank 2 be just then?

Answers: 3

Answer

Physics, 22.06.2019 05:00

At time t=0, a particle is located at the point (3,6,9). it travels in a straight line to the point (5,2,7), has speed 8 at (3,6,9) and constant acceleration 2i−4j−2k. find an equation for the position vector of the particle.

Answers: 2

Answer

Physics, 22.06.2019 06:30

The mini-refrigerator fire was most likely caused by what type of wiring?

Answers: 2

Answer

You know the right answer?

(BRAINLIEST) Which is an example of the force of attraction between two objects that have mass?

Questions