Physics, 08.01.2021 14:00 mallyosburn

(b) On what factor does the mechanical advantage of a simple machine depend?
(a) N/m
B.
Very short answer questions,
1.
What is the principle of simple machine?
2.
3.
The efficiency of simple machine is 75%. What does it mean?
4.
S.
What is lever?
In how many classes is lever classified?
Write the name of a simple machine used to change the direction of force.
6.
0
Reliant Science - 9

Answers: 2

Show answers

Answers

Answer from: suiani8

B. 1. The factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. A 75% efficiency of a simple machine means that the power of the frictional force is one quarter of the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be applied

5. There are three classes of lever

6. A pulley

Explanation:

B. 1. For simple machines, we have the Ideal Mechanical Advantage, IMA, given as follows;

$IMA = \dfrac{F_r}{F_e} = \dfrac{d_e}{d_r}$

Where;

F_r = The resistance force (The load)

F_e = The effort force

d_e = The distance moved by the effort

d_r = The distance the load is moved

Therefore, the factors on which the mechanical advantage depends are the load, the effort, the distance moved by the load and the distance moved by the effort

2. The principle of a simple machine is the conversion of the direction and magnitude of a force input into one or more outputs of a either a different magnitude, or direction or both

3. The mechanical efficiency of a simple machine, η, can be expressed as follows;

$\eta =\dfrac{P_{out}}{P_{in}}$

Where;

$P_{out}$ = The power at output

$P_{in}$ = The input power

$P_{in}$ = $P_{out}$ + $P_{friction}$

$P_{friction}$ = The frictional force's power

Therefore, an efficiency of 75% means that we have;

$P_{out}$ = η × $P_{in}$ = 0.75 × $P_{in}$ = 0.75· $P_{in}$

From which we have;

$P_{in}$ = $P_{out}$ + $P_{friction}$ = 0.75· $P_{in}$ + $P_{friction}$

∴ $P_{friction}$ = $P_{in}$ - 0.75· $P_{in}$ = 0.25· $P_{in}$

Therefore, 75% efficiency of a simple machine means that the power of the frictional force is 0.25 × (or one quarter of) the power of the input force

4. A lever is a simple machine that consists of a fulcrum over (or under) which a rigid beam can be applied

5. There are three classes of lever

(a) First class lever (b) Second class lever and (c) Third class lever

6. A pulley

A pulley acts by lifting a load upward from a downward applied force.

Answer from: Quest

gravititional force is a force that is acting around you, it is non-contactable and it is a force that pulls you to the core of the earth.

brainliest

Answer from: Quest

Yup no bull frogs here man

Another question on Physics

Physics, 22.06.2019 04:00

Amodel rocket with a mass of 0.212 kg is launched into the air with an initial speed of 84 m/s. how much kinetic energy will the rocket have at a height of 214 m? assume there is no wind resistance. 634 j 303 j

Answers: 2

Answer

Physics, 22.06.2019 15:10

Difference between series and parallel circuits

Answers: 3

Answer

Physics, 22.06.2019 15:30

The radius of a sphere is increasing at a rate of 9 cm/ sec. find the radius of the sphere when the volume and the radius of the sphere are increasing at the same numerical rate.

Answers: 1

Answer

Physics, 22.06.2019 16:00

The field between two charged parallel plates is kept constant. if the two plates are brought closer together, the potential difference between the two plates either a) decrease b) does not change c) increase?

Answers: 3

Answer

You know the right answer?

(b) On what factor does the mechanical advantage of a simple machine depend?
(a) N/m
B.

Questions