An electric ceiling fan is rotating about a fixed axis with an initial angular velocity magnitude of 0.220 rev/s . The magnitude of the angular acceleration is 0.920 rev/s2 . Both the the angular velocity and angular acceleration are directed counterclockwise. The electric ceiling fan blades form a circle of diameter 0.800 m . 1) Compute the fan's angular velocity magnitude after time 0.208 s has passed.
2)Through how many revolutions has the blade turned in the time interval 0.208 s from Question 1?
3)What is the tangential speed vt of a point on the tip of the blade at time t = 0.208 s ?
4)Calculate the magnitude at of the tangential acceleration of a point on the tip of the blade at time t = 0.208 s .
5)Calculate the magnitude ar of the radial (or centripetal) acceleration of the point at the end of the fan blade.

1) The fan's angular velocity after 0.208 seconds is approximately 2.585 rad/s

2) The number of revolutions the blade has travelled in 0.208 s is approximately 0.066 revolutions

3) The tangential speed of a point on the tip of the blade at time t = 0.208 s is approximately 1.034 m/s

4) The magnitude of the tangential acceleration of a point on the tip of the blade at time t = 0.208 seconds is approximately 2.312 m/s²

Explanation:

The given parameters are;

The initial velocity of the fan, n = 0.220 rev/s

The magnitude of the angular acceleration = 0.920 rev/s²

The direction of the angular acceleration and the angular velocity = Clockwise

The diameter of the circle formed by the electric ceiling fan blades, D = 0.800 m

1) The initial angular velocity of the fan, ω₀ = 2·π × n = 2·π × 0.220 rev/s = 1.38230076758 rad/s

The angular acceleration of the fan, α = 2·π×0.920 rad/s² = 5.78053048261 rad/s²

The fan's angular velocity, 'ω', after a time t = 0.208 seconds has passed is given as follows;

ω = ω₀ + α·t

From which we have;

ω = 1.38230076758 rad/s + 5.78053048261 rad/s × 0.208 s = 2.58465110796 rad/s

The fan's angular velocity after 0.208 seconds is ω ≈ 2.585 rad/s

2) The number of revolutions the blade has travelled in the given time interval is given from the angle turned, 'θ', in the given time as follows;

θ = ω₀·t + 1/2·α·t²

θ = 1.38230076758 × 0.208 + 1/2 × 5.78053048261 × 0.208² = 0.41256299505 radians

2·π radians = 1 revolution

∴ 0.41256299505 radians = 0.41256299505 radian× 1 revolution/(2·π radian) = 0.06566144 revolution

The number of revolutions the blade has travelled in 0.208 s ≈ 0.066 revolutions

3) The tangential speed of a point on the tip of the blade at time t = 0.208 s is given as follows;

The tangential speed, = ω × r = ω × D/2

At t = 0.208 s, ω = 2.58465110796 rad/s, therefore, we have;

= ω × D/2 = 2.58465110796 × 0.800/2 = 1.0338604413

The tangential speed, = 1.0338604413 m/s

The tangential speed ≈ 1.034 m/s

4)  The magnitude of the tangential acceleration of a point on the tip of the blade at time t = 0.208 seconds, 'a' is given as follows;

a = α × r = α × D/2

a = 5.78053048261 × 0.800/2 = 2.31221219304

The tangential acceleration, a ≈ 2.312 m/s²

-first use of geothermal energy occurred more than 10,000 years ago in north america by american paleo-indians

-the first industrial use of geothermal energy began near pisa, italy in late 18th century

-in 1904, italian scientist piero ginori conti invented the first geothermal electric power plant in which steam was used to generate the power

-with the above experiment, the first geothermal plant in usa started in 1922 with a capacity of 250 kilowatts

-however, in 1946 first ground-source geothermal heat pump installed at commonwealth building in portland, oregon

-during the 1960’s, pacific gas and electric began operation of first large scale geothermal power plant in san francisco, producing 11 megawatts

-in 1973, when oil crisis began many countries began looking for renewable energy sources and by 1980’s geothermal heat pumps (ghp) started gaining popularity in order to reduce heating and cooling costs

-as effect of climate change started showing results, governments of various countries joined hands to fight against it, for which kyoto protocol was signed in japan in 1997, laid out emission targets for rich countries and required that they transfer funds and technology to developing countries, 184 countries have ratified it

hope this