subject
Physics, 27.01.2021 21:30 daltonduh6218

Biofuels - Both biodiesel and renewable diesel can be produced from plant or animal oils, fats, and wastes. According to the U. S. Energy Information Administration, the United States uses a combination of oils and fats in biodiesel production: soy oil 65%, corn oil 7.5%, and yellow grease and white grease was less than 8% of production of 8,478 million pounds of feedstock inputs for biodiesel in 2013. According to the latest published life-cycle analysis for various feedstocks and the feedstock mix reported by the Energy Information Administration and the U. S. EPA for 2013, the average GHG reduction for biomass-based diesel exceeds 80%. If biofuels provided a quarter of transport fuel in 2050, it would avoid an estimated 2.1 gigatons of GHG emissions per year. Although biofuels are among the few fuels for medium- and heavy-duty trucking that are considered renewable, there are some issues regarding its status as a sustainable fuel source. The sustainability of biofuels comes into question on several fronts. All BUT ONE is a reason why environmentalists question biofuels as sustainable energy resources.

ansver
Answers: 2

Another question on Physics

question
Physics, 22.06.2019 16:00
Suppose a soccer ball is kicked from the ground at an angle 20.0º above the horizontal at 8.00 m/s. the y-velocity is determined to be 2.74 m/s. how long will the ball be in the air? assume the ball lands at the same height at which it was kicked.
Answers: 2
question
Physics, 22.06.2019 18:30
Asmall grinding wheel has a moment of inertia of 4.0×10−5 kg⋅m2 . what net torque must be applied to the wheel for its angular acceleration to be 150 rad/s2 ?
Answers: 3
question
Physics, 22.06.2019 19:00
The particle p starts from rest at point a at time t = 0 and changes its speed thereafter at a constant rate of 2.8g as it follows the horizontal path shown. determine the magnitude and direction of its total acceleration (a) just before point b, (b) just after point b, and (c) as it passes point c. state your directions relative to the x-axis shown (ccw positive) and choose the angle with the smallest magnitude.
Answers: 1
question
Physics, 22.06.2019 19:30
Refrigerant-134a flows through a carnot heat pump cycle at 0.5 kg/s. it is known that the maximum absolute temperature in the cycle is 1.1 times the minimum absolute temperature, and the net power input to the cycle is 2.5 kw. if the refrigerant changes from a saturated vapor to a saturated liquid during the heat rejection process, determine the maximum magnitude of the enthalpy of vaporization for this process in kj/kg (with 3 significant figures).
Answers: 3
You know the right answer?
Biofuels - Both biodiesel and renewable diesel can be produced from plant or animal oils, fats, and...
Questions
question
Spanish, 05.05.2020 22:34
question
Biology, 05.05.2020 22:34
Questions on the website: 13722363