subject
Physics, 09.02.2021 01:40 turtlesage21

A shaft is to be designed to transmit 10kW of power at 2000rpm. The shear stress must be kept below 300MPa and the shear modulus is 75GPa. The shaft is 1m long and must have less than 2표of rotation from end to end. Determine the minimum required diameter.

ansver
Answers: 3

Another question on Physics

question
Physics, 22.06.2019 14:40
During the experiment if you could triple the breakaway magnetic force with all other quantities left unchanged, what is the new value for the critical velocity if it was v0 (initial velocity), initially? (b) now if you halved the radius with all other quantities left unchanged, what is the new critical velocity if it was v0 (initial velocity), initially? (c) if during the experiment, critical velocity quadrupled with all other quantities left unchanged, what is the new breakaway force if its magnitude was initially f0,?
Answers: 1
question
Physics, 22.06.2019 19:30
Because atoms of elements in the same group of thbecause atoms of elements in the same group of the periodic table have the same number of neutrons, they have similar properties. select the best answer from the choices provided t fe periodic table have the same number of neutrons, they have similar properties. select the best answer from the choices provided t f
Answers: 1
question
Physics, 22.06.2019 23:30
Sound travels slower in colder air that it does in warmer air. make a claim about the effect of air temperature on the speed of sound. support your claim with evidence
Answers: 3
question
Physics, 22.06.2019 23:40
Along wire of diameter 1 mm is submerged in an oil bath of temperature ∞ 31°c. the wire has an electrical resistance per unit length of 0.01 ω/m. if a current of 103 a flows through the wire and the convection coefficient is 500 w/m2·k, what is the steady-state temperature of the wire? from the time the current is applied, how long does it take for the wire to reach a temperature that is within 1°c of the steady-state value? the properties of the wire are 8000 kg/m3, 500 j/kg·k, and 20 w/m·k.
Answers: 3
You know the right answer?
A shaft is to be designed to transmit 10kW of power at 2000rpm. The shear stress must be kept below...
Questions
Questions on the website: 13722367