The force of a bag of potatoes on a vegetable stand is 22.5 n down. what is the force of the vegetable stand on the bag of potatoes?

As per Newton's III law we can say that

Force applied by object 1 on object 2 is always equal in magnitude and opposite in direction of the force that object 2 apply on object 1.

So we can say it as

now here above question is based upon the same

if a bag of vegetables applied a force F = 22.5 N of the surface stand the the same surface will apply same magnitude of force in opposite direction on the vegetables bag

So our answer will be F = 22.5 N (upwards).

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the answer would be c