subject
Physics, 25.02.2021 19:20 Honeyswish7730

IF HELP TODAY AND SHOW WORK ILL MAKE BRAINIEST (1) Crash Test. An automobile safety laboratory perform s crash tests of vehicles to ensure their safety in high-speed
collisions. The engineers set up a head-on crash test for a Smart Car which collides with a solid barrier. The
engineers know the car initially travels south at 100 km/h and the crash test dummy moves m south during the
collision. The engineers have a couple of questions: How much time does the collision take? What is the
passenger's acceleration during the collisioh?
(2) Microscopic physics. All cell biology works according to the laws of physics! A sodium ion (3.817x10-20kg)
arrives near an opening in a cell. You may assume it is initially at rest. Electric forces cause it to speed up and
travel towards the cell opening. As a result, it travels 1.48x10min 0.512 s. What is the acceleration of the
sodium ion?
(3) Off the Wall. An important part of Penny's swim race is when she turns around while pushing on the
swimming pool wall. When she makes contact with the wall, she is travelling at 1.66 m/s east. After pushing
against the wall for 0.3 s, she leaves contact with it and is travelling at 1.98 m/s west. What is her acceleration
during this time?
(4) The Track. A cart is placed at the bottom of an inclined track. It uses a spring to launch itself up the incline with a
speed of 0.79 m/s. While travelling up and down the incline, the cart has an acceleration of 0.54 m/s? How much
time does it take to make the complete trip up and back down to its starting position? (Hint: this is a one-step
problem

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 12:00
You have a resistor and a capacitor of unknown values. first, you charge the capacitor and discharge it through the resistor. by monitoring the capacitor voltage on an oscilloscope, you see that the voltage decays to half its initial value in 2.70 miss . you then use the resistor and capacitor to make a low-pass filter. what is the crossover frequency fc?
Answers: 2
question
Physics, 22.06.2019 22:30
Calculate a pendulums frequency of oscillation (in hz) if the pendulum completes one cycle in 0.5s.
Answers: 1
question
Physics, 23.06.2019 01:00
What do we mean by the event horizon of a black hole?
Answers: 1
You know the right answer?
IF HELP TODAY AND SHOW WORK ILL MAKE BRAINIEST (1) Crash Test. An automobile safety laboratory perf...
Questions
question
Social Studies, 21.07.2019 23:40
question
Mathematics, 21.07.2019 23:40
Questions on the website: 13722367