B) A timber beam is 120 mm wide and 200 mm deep and is used on a span of 4 m. The beam carriage uniformly distributed load of 3 kN/m run over the entire length. Find the maximum bending stress induced.

​

Carbon is allowed to diffuse through a steel plate 15 mm thick. the concentrations of carbon at the two faces are 0.65 and 0.30 kg c/m^3 fe, which are maintained constant. if the preexponential and activation energy are 6.2 x 10-7 m2 /s and 80,000 j/mol, respectively, compute the temperature at which the diffusion flux is 1.43 x 10^-9 kg/m^2 -s.

Antireflective coatings on solar cells are often made by applying a thin film of silicon nitride (sinx), which has an index of refractive of 1.2, on the top of the silicon solar cell, which has a refractive index of about 3.5. however, the sun emits radiation of various wavelengths which the solar cell absorbs, and the antireflective coating can only absolutely minimize the reflection of one of these wavelengths. the coating thickness is chosen to reduce the reflection of green/yellow light (e = 2.2 ev), which is the most intense color in the solar spectrum (shown below). which of the following coatings would minimize reflection of green/yellow light? the answer is 820 nm how? what is the angular width of the central maximum of an electron traveling at 2 x 108 m/s going through a single slit of width 1 mm.

En un laboratorio, nakisha mezcla una solución de hidróxido de sodio con un indicador llamado fenolftaleína. cuando se combinan, crean una solución de color rosa. nakisha se pregunta si la mezcla de otras soluciones con fenolftaleína también creará este color rosa. ? cómo podría nakisha utilizar el proceso de investigación científica para determinar si la mezcla de otras soluciones con fenolftaleína también creará un color rosa? marque las que correspondan.