A ladder 9.00 m long leans against the side of a bulding. if the ladder is inclined at an angle of 75.0° to the horizontal, what is the horizontal distance from the bottom of the ladder to building​

Does work output exceed work input when a machine is used? a) yes, it does, as machines create energy. b) it depends on the type of machine used. c) no, it doesn’t, as machines are inefficient. d) no, it doesn’t, as machines cannot create energy.

On a horizontal frictionless surface, a small block with mass 0.200 kg has a collision with a block of mass 0.400 kg. immediately after the collision, the 0.200 kg block is moving at 12.0 m/s in the direction 30° north of east and the 0.400 kg block is moving at 11.2 m/s in the direction 53.1° south of east. use coordinates where the +x-axis is east and the +y-axis is north.(a) what is the total kinetic energy of the two blocks after the collision (in ) what is the x-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your ) what is the y-component of the total momentum of the two blocks after the collision? (indicate the direction with the sign of your answer.)

The frequency of a tuning fork can be found by the method shown. a long tube open at both ends is submerged in a beaker of water, and the vibrating tuning fork is placed near the top of the tube. the length l of the air column is adjusted by moving the tube vertically. the sound waves generated by the fork are reinforced when the length of the air column corresponds to one of the resonant frequencies of the tube. the smallest value for l for which a peak occurs in sound intensity is 7 cm. l what is the frequency of the tuning fork? the speed of sound in air is 345 m/s. answer in units of hz