A confined aquifer is 33 m thick and 7 km wide. Two observation wells are located 1.2 km apart in the direction of flow. The head in well 1 is 97.5 m and in well 2 it is 89.0 m. The hydraulic conductivity is 1.2 m/d. (A) What is the total daily flow of water through the aquifer and (B) What is the elevation of the potentiometric surface at a point located 0.3 km from well h1 and 0.9 km from well h2

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

An object is 10 cm from the mirror, its height is 1 cm and the focal length is 5 cm. what is the image height? (indicate the object orientation by including the + or - sign with the answer.) hi = cm +1 -1 +10 -10

Clothing made of several thin layers of fabric with trapped air in between, often called ski clothing, is commonly used in cold climates because it is light, fashionable, and a very effective thermal insulator. so it is no surprise that such clothing has largely replaced thickand heavy old-fashioned coats. (a) consider a jacket made of five layers of 0.1-mm-thick synthetic fabric (k = 0.13 w/m·°c) with 1.5-mm-thick air space (k = 0.026 w/m·°c) between the layers. assuming the inner surface temperature of the jacket to be 28°c and the surface area to be 1.25 m2, determine the rate of heat loss through the jacket when the temperature of the outdoors is 0°c and the heat transfer coefficient at the outer surface is 25 w/m2·°c. (b) what would your response be if the jacket is made of a single layer of 0.5-mm-thick synthetic fabric? what should be the thickness of a wool fabric (k = 0.035 w/m·°c) if the person is to achieve the same level of thermal comfort wearing a thick wool coat instead of a five-layer ski jacket?