You are working as an electrical technician. One day, out in CR the field, you need an inductor but cannot find one. Look- ing in your wire supply cabinet, you find a cardboard tube with single-conductor wire wrapped uniformly around it to form a solenoid. You carefully count the turns of wire and find that there are 580 turns. The diameter of the tube is 8.00 cm, and the length of the wire-wrapped portion is 36.0 cm. You pull out your calculator to determine (a) the inductance of the coil and (b) the emf generated in it if the current in the wire increases at the rate of 4.00 A/s.

Select light for the type of wave, adjust the wavelength so that the light is red, and increase the amplitude of the light to the max. then, select the start button at the source location to begin producing the waves. light is a form of electromagnetic wave, containing oscillating electric and magnetic fields. the wave amplitude detector mentioned above shows how the electric field oscillates in time at the location of the probe. the amplitude of the wave at the location of the probe is equal to the maximum electric field measured. how does the amplitude of the wave depend on the distance from the source?