subject
Physics, 24.03.2021 22:30 matluck7956

An 8.00 X 102-g block of lead is heated in boiling water, 100.0°C, until the block's temperature is the
same as the water's. The lead is then removed from
the boiling water and dropped into 2.50 X 10² g of
cool water at 12.2°C. After a short time, the temper-
ature of both lead and water is 20.0°C.
a. How much heat is gained by the cool water?
b. On the basis of these measurements, what is the
specific heat of lead?

ansver
Answers: 3

Another question on Physics

question
Physics, 21.06.2019 18:10
How does the space charge width change with forward and reverse bias? also, calculate the space charge width for a reverse bias of 4v on a silicon pn junction at t = 300k and doping concentrations of na = 5x1015cm-3 , nd = 5x 1016 cm-3 .
Answers: 3
question
Physics, 22.06.2019 05:00
Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?
Answers: 1
question
Physics, 22.06.2019 05:30
Could someone me find the answer to this problem.
Answers: 1
question
Physics, 22.06.2019 12:00
Asolid round steel rod 6.25 mm in diameter and 375 mm long is rigidly bonded to the end of solid square brass rod 25 mm on a side and 300 mm long. the geometric axes of the bare are along the same line. an axial tensile force of 5.4 kn is applied at the extreme ends of the assembly. for steel e = 200 gpa and for brass e = 90 gpa. determine the total elongation for the assembly.
Answers: 1
You know the right answer?
An 8.00 X 102-g block of lead is heated in boiling water, 100.0°C, until the block's temperature is...
Questions
Questions on the website: 13722361