Two in-phase loudspeakers that emit sound with the same frequency are placed along a wall and are separated by a distance of 8.00 m. A person is standing 12.0 m away from the wall, equidistant from the loudspeakers. When the person moves 3.00 m parallel to the wall, she experiences destructive interference for the second time. What is the frequency of the sound

Explanation:

Given

Distance between two speakers is 8 m

Man is standing 12 away from the wall

When the person moves 3 parallel to the wall

the parallel distances from the speaker become 4+3, 4-3

Now, the difference of distances from the speaker is

Condition for destructive interference is

for second destructive interference; n=2

most voltage drop calculators want the distance between the source and destination. then internally, they double it so both the source and return wires are calculated. but you need to know which distance the calculator uses so you're not half of what you should be or double what you should be.

most circuit breakers will not take a #6 directly, so the electrician will have to splice on a smaller pigtail. you also have to upsize the grounding wire when you upsized the ungrounded (hot) wire (see note in 250.122). this will preclude using most cable assemblies, as a cable with #6 copper will most likely only have a #10 grounding conductor. you need a #6 grounding conductor if the circuit is 20a. a #8 cable is no better, as it will have a #10 grounding conductor too. but most 20a breakers will take a #8 directly.

in your related post, you didn't say what type of load this is. if it is a light or heater, voltage drop won't be a big issue. if this is a motor, the current needs are huge at startup and the voltage drop can pose a problem. if this is a motor, knowing if the motor is under much load during startup will answer the voltage drop effect (a saw is easier to start than a compressor).

the answer is to check all of them! they all apply well at least i think so!