Physics, 15.04.2021 22:40 kayleahrayne

1. Find the current in a circuit where the voltage is 9 volts and the resistance is 4 ohms. a. 36 amps

b. 2.25 amps

c. 2 amps

d. 18 amps

2. Find the current in a circuit where the voltage is 120 volts and the resistance is 4 ohms.

a. 3 amps

b. 240 amps

c. 30 amps

d. 480 amps

3. Find the voltage in a circuit where the current is 10 amps and the resistance is 12 ohms.

a. 1.2 volts

b. 60 volts

c. 0.83 volts

d. 120 volts

4. Find the voltage in a circuit where the current is 3 amps and the resistance is 3 ohms.

a. 1 volt

b. 9 volts

c. 0 volts

d. 120 volts

5. Find the resistance in a circuit where the current is 10 amps and the voltage is 120 volts.

a. 130 ohms

b. 1200 ohms

c. 12 ohms

d. 110 ohms

6. Find the resistance in a circuit where the current is 20 amps and the voltage is 120 volts.

a. 6 ohms

b. 12 ohms

c. 240 ohms

d. 100 ohms

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 00:40

The rigid beam is supported by the three suspender bars. bars ab and ef are made of aluminum and bar cd is made of steel. if each bar has a cross-sectional area of 450 mm2, determine the maximum value of p if the allowable stress is (σallow)st = 200 mpa for the steel and ( σallow)al = 150 mpa for the aluminum. est = 200 gpa and eal = 70 gpa.

Answers: 1

Answer

Physics, 22.06.2019 05:40

Unpolarized light of intensity i_0=750w/m^2 is incident upon two polarizers. after passing through both polarizers the intensity is i_2=280w/m^2. (a) what is the intensity of the light after it passes through the first polarizer in w/m^2? (b) write an equation for the angle between the polarizers in terms of the initial (i_0) and final (i_2) intensities. (c) find the angle between the polarizers in degrees.

Answers: 3

Answer

Physics, 22.06.2019 15:30

Match each scenario to the form of energy it represents

Answers: 2

Answer

Physics, 22.06.2019 16:50

Acommercial refrigerator with refrigerant-134a as the working fluid is used to keep the refrigerated space at -35°c by rejecting waste heat to cooling water that enters the condenser at 18°c at a rate of 0.25 kg/s and leaves at 26°c. the refrigerant enters the condenser at 1.2 mpa and 50°c. if the compressor consumes 3.3 kw of power, determine (a) the mass flow rate of the refrigerant, (b) the refrigeration load, (c) the cop, and (d) the minimum power input to the compressor for the same refrigeration load.

Answers: 2

Answer

You know the right answer?

1. Find the current in a circuit where the voltage is 9 volts and the resistance is 4 ohms. a. 36 a...

Questions