How are slumps and slides different?

a. slumps are a type of sediment flow. slides are a type of slope failure.

b. slides are a type of sediment flow. slumps are a type of slope failure.

c. slumps happen very quickly. slides happen very slowly over time.

d. slides move sediment down pre- existing rock surfaces. slumps carve out curves of sediment.

Asteam power plant operates on an ideal reheat rankine cycle between the pressure limits of 15 mpa and 10 kpa. the mass flow rate of steam through the cycle is 12 kg/s. steam enters both stages of the turbine at 500°c. if the moisture content of the steam at the exit of the low-pressure turbine is not to exceed 10 percent, determine (a) the pressure at which reheating takes place, (b) the total rate of heat input in the boiler, and (c) the thermal efficiency of the cycle. also, show the cycle on a t-s diagram with respect to the saturation lines. (2.15 mpa; 45.0 mw; 42.6%)

Which lists the organs in the correct order as food passes from the mouth to anus?

During which interval are the persons represented by the graph not moving? a) 0 to 0.5 hrs b) 1.5 to 2 hrs c) 2 to 2.5 hrs d) 4.5 to 5 hrs