Physics, 17.09.2019 06:30 vavery61

Amagnetic field is created by a charged particle that is

Answers: 1

Show answers

Another question on Physics

Physics, 22.06.2019 15:30

At 20∘c, the hole in an aluminum ring is 2.800 cm in diameter. you need to slip this ring over a steel shaft that has a room-temperature diameter of 2.804 cm . 1. to what common temperature should the ring and the shaft be heated so that the ring will just fit onto the shaft? coefficients of linear thermal expansion of steel and aluminum are 12×10−6 k−1 and23×10−6 k−1 respectively.

Answers: 1

Answer

Physics, 22.06.2019 21:10

Aspecified volume of space contains an electric field for which the magnitude is given by e=e0cos(ωt). suppose that e0 = 20 v/m and ω = 1.0 × 107 s−1. part a what is the maximum displacement current through a 0.80 m2 cross-sectional area of this volume? express your answer with the appropriate units. idisp,max i d i s p , m a x = nothing nothing request answer part b how would this area have to be oriented relative to the electric field to get this maximum displacement current?

Answers: 2

Answer

Physics, 22.06.2019 22:30

Asailboat is traveling to the right when a gust of wind causes the boat to accelerate leftward at 2.5m/s2 for 4s. after the wind stops, the sailboat is traveling to the left with a velocity of 3.0m/s.assuming the acceleration from the wind is constant, what was the initial velocity of the sailboat before the gust of wind? answer using a coordinate system where rightward is positive.

Answers: 1

Answer

Physics, 23.06.2019 00:00

You are a researcher for a golf club manufacturer. you are given two identical looking cubes of a metal alloy. you are informed that they are made of the exact same material, but one is crystalline, whereas the other is amorphous. it is your job to determine which one is amorphous this one is more stress-resistant and is useful in reinforcing golf clubs. which of the following is the best way to determine which is which? a. determine the density of each cube. the more dense one is the amorphous solid. b. melt both cubes and look for a broader range of melting temperatures. the one that melts over a broader range of temperatures is the amorphous solid. c. determine the density of each cube. the less dense cube is the amorphous solid. d. melt both cubes and measure the range of melting temperatures. the one that melts over a narrower range of temperatures is the amorphous solid.

Answers: 1

Answer

You know the right answer?

Amagnetic field is created by a charged particle that is...

Questions