subject
Physics, 09.01.2020 19:31 michaelwilliams1356

The launching velocity of a missile is 20.0 m/s, and it is shot at 53º above the horizontal. what is the horizontal component of the velocity at launch?

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 22:10
Agas is contained in a vertical, frictionless piston–cylinder device. the piston has a mass of 3.2 kg and a cross-sectional area of 35 cm2. a compressed spring above the piston exerts a force of 190 n on the piston. if the atmospheric pressure is 95 kpa, determine the pressure inside the cylinder.
Answers: 3
question
Physics, 22.06.2019 16:00
Amichelson interferometer operating at a 600 nm wavelength has a 3.02-cm-long glass cell in one arm. to begin, the air is pumped out of the cell and mirror m2 is adjusted to produce a bright spot at the center of the interference pattern. then a valve is opened and air is slowly admitted into the cell. the index of refraction of air at 1.00 atm pressure is 1.00028.how many bright-dark-bright fringe shifts are observed as the cell fills with air?
Answers: 1
question
Physics, 22.06.2019 22:30
An alarm clock has a current of 4.5 amps and a resistance of 3.2 ohms. what is the voltage in the circuit? a.1.4 volts b.0.71 volts c.14 volts d.46 volts
Answers: 2
question
Physics, 23.06.2019 02:10
Find the steady-state temperature at the center of the plate = /2, = /2) for sums of w from n=1 to n=19 (only odd values). find the value of n for which the change in /2, /2) is less than 1% from the value at the previous n. at this point, we consider the solution converged. does the value of the temperature at the center seem reasonable? in this part, the values of x and y are constant scalar values. you should produce a plot of the value of n on the horizontal and the estimate of the temperature at the center of the plate on the vertical. b. using the value of n (or larger) that resulted in convergence in part (a), create a contourf plot of the temperature distribution across the entire plate. use enough spatial subdivisions to create a useful plot. comment on the results. hint: you need to determine what “x” and “y” values to use to make your t matrix. i recommend using a different number of x and y values. use enough x and y values so that the plot is “smooth”.
Answers: 1
You know the right answer?
The launching velocity of a missile is 20.0 m/s, and it is shot at 53º above the horizontal. what is...
Questions
question
Mathematics, 13.05.2021 19:20
question
English, 13.05.2021 19:20
question
Mathematics, 13.05.2021 19:20
Questions on the website: 13722367