subject
Physics, 05.10.2019 21:30 rleiphart1

Abullet of mass m= 10 gram strikes a ballistic pendulum of mass m=2.0 kg. the center of mass of the pendulum rises a vertical distance of h=12 cm. assuming the bullet remains embedded in the pendulum, calculate its initial speed.

ansver
Answers: 1

Another question on Physics

question
Physics, 22.06.2019 00:20
2.22/3.33 points | previous answers tamucolphysmechl1 4.pre.002. ask your teacher my notes question part points submissions used on a frictionless air track, a blue glider with mass 0.200 kg is moving to the right with a speed of 8.00 m/s. it strikes a red glider that has mass 0.600 kg and that is initially at rest. after the collision, the blue glider is moving to the left with a speed of 2.40 m/s. (a) what are the magnitude and direction of the velocity of the red glider after the collision? magnitude 3.33 m/s correct: your answer is correct. direction correct: your answer is correct. (b) is this collision elastic?
Answers: 1
question
Physics, 22.06.2019 01:20
An engineer designs a roller coaster so that a car travels horizontally for 152 ft, then climbs 137 ft at an angle of 34.0° above the horizontal. it then moves 137 ft at an angle of 48.0° below the horizontal. if we take the initial horizontal motion of the car to be along the +x-axis, what is the car's displacement? (give the magnitude of your answer, in ft, to at least four significant figures and give the direction of your answer in degrees counterclockwise from the +x-axis.)
Answers: 1
question
Physics, 22.06.2019 02:50
Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)
Answers: 3
question
Physics, 22.06.2019 15:30
What is a view of science and psychology that says the value of knowledge depends on its usefulness? a. pragmatism b. psychotherapy c. physiology
Answers: 2
You know the right answer?
Abullet of mass m= 10 gram strikes a ballistic pendulum of mass m=2.0 kg. the center of mass of the...
Questions
question
Business, 28.06.2019 07:30
question
Mathematics, 28.06.2019 07:30
Questions on the website: 13722367