Cassy shoots a large marble (marble a, mass: 0.06 kg) at a smaller marble (marble b, mass: 0.03 kg) that is sitting still. marble a was initially moving at a velocity of 0.7 m/s, but after the collision it has a velocity of –0.2 m/s. what is the resulting velocity of marble b after the collision?

What property is a characteristic of a substance that can be observed and does not change the identity of the substance

Steam is generated in a boiler of a cogeneration plant at 10 mpa and 450°c at a steady rate of 5 kg/s. in normal operation, steam expands in a turbine to a pressure of 0.5 mpa and is then routed to the process heater, where it supplies the process heat. steam leaves the process heater as a saturated liquid and is pumped to the boiler pressure. in this mode, no steam passes through a condenser, which operates at 20 kpa. (a) determine the power produced in the turbine and the rate at which process heat is supplied in this mode. (b) determine the power produced in the turbine and the rate of process heat supplied if only 60 percent of the steam is routed to the process heater and the remainder is expanded to the condenser pressure. (3.32 mw; 9.69 mw; 4.25 mw; 5.82 mw)

The coefficient of friction is a number that represents the resistance to sliding between two in contact with one another.