Asand core used to form the internal surfaces of a steel casting experiences a buoyancy force of 225 n. the volume of the mold cavity forming the outside surfaces of the casting = 4840 cm3. what is the weight (in kg) of the final casting? ignore considerations of shrinkage

Newton’s second law gives us the relationship of force F, mass m and acceleration a. The formula is given as:

F = m a                  --> 1

However we also know that the relationship of mass m, density ρ, and volume V is:

m = V ρ                 --> 2

Therefore substituting equation 2 to equation 1:

F = ρ V a = ρ V g

where a is acceleration due to gravity, ρ is density of water and V is the volume of the casting, therefore:

F = (1x10^-3 kg/cm^3) (4840 cm^3) (9.8 m/s^2)

F = 47.432 kg m/s^2

F = 47.432 N

Going back to equation 1:

47.432 N = m (9.8 m/s^2)

m = 4.84 kg

Hence the weight of the final casting is 4.84 kg

explanation:

v=uf/(u-f)

= 5.-10/(5+10) convex lens has negative focal length

so here is the information for current research:

-nrel's geothermal analysts, scientists, and engineers perform a full range of research from developing advanced methods of locating and accessing geothermal resources to exploring innovative technologies to extract and produce clean energy from the heat of the earth

and here is the information for the technology of geothermal energy:

-it's clean and sustainable

-resources of geothermal energy range from the shallow ground to hot water and hot rock found a few miles beneath the earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma

-almost everywhere, the shallow ground or upper 10 feet of the earth's surface maintains a nearly constant temperature between 50° and 60°f (10° and 16°c)

-geothermal heat pumps can tap into this resource to heat and cool buildings

-a geothermal heat pump system consists of a heat pump, an air delivery system (ductwork), and a heat exchanger-a system of pipes buried in the shallow ground near the building

-in the winter, the heat pump removes heat from the heat exchanger and pumps it into the indoor air delivery system

-in the summer, the process is reversed, and the heat pump moves heat from the indoor air into the heat exchanger

-the heat removed from the indoor air during the summer can also be used to provide a free source of hot water