subject
Physics, 29.11.2019 23:31 thealienminecra

If a ball of mass, m, moving at velocity, v, collided with a ball of mass 10m at rest, describe what could happen to the velocities of the balls after the collision. assume the less massive ball bounces off the more massive ball and moves in the negative direction. be specific about their relative final velocities compared with the initial velocity of the less massive ball.

ansver
Answers: 2

Another question on Physics

question
Physics, 21.06.2019 19:30
Agymnast dismounts off the uneven bars in a tuck position with a radius of 0.3m (assume she is a solid sphere) and an angular velocity of 2rev/s. during the dismount she stretches out into the straight position, with a length of 1.5m, (assume she is a uniform rod through the center) for her landing. the gymnast has a mass of 50kg. what is her angular velocity in the straight position?
Answers: 2
question
Physics, 21.06.2019 22:00
Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)
Answers: 1
question
Physics, 22.06.2019 03:00
If it takes a planet 2.8 x 10^8 s to orbit a star with a mass of 6.2 x 10^30 kg what is the average distance between the planet and the star
Answers: 3
question
Physics, 22.06.2019 13:40
Use the profile illustrated for problem (1). assume that the layer of silty sand fill (sm) is placed over the entire site. estimate the thickness of the fill (h - in feet) that will cause the effective vertical stress at the center of the clay layer to increase by 517.5 pounds per square foot.
Answers: 1
You know the right answer?
If a ball of mass, m, moving at velocity, v, collided with a ball of mass 10m at rest, describe what...
Questions
question
Mathematics, 05.01.2021 18:10
question
English, 05.01.2021 18:10
question
Social Studies, 05.01.2021 18:10
question
Health, 05.01.2021 18:10
Questions on the website: 13722360