3. A large crane lifts a 25,000 kg mass in the air. The amount of work that must be done by the crane's lifting components is 2.2 X 10'J (Wo). If the efficiency of the crane is 22%, how much
useful work is done on the mass (Wou)?

Zirconium has an hcp crystal structure and a density of 6.51 g/cm3. (a) what is the volume of its unit cell in m3? (b) if the c/a ratio is 1.593, compute the values of c and a.

Aroll in a paper machine is powered by a separately excited dc machine. operating point 1 (under load): the roll typically operates at 764 rpm and must provide 301 nm of torque to oppose the load of the paper. the armature voltage is 230v for this operating point operating point 2 (no load): when the load is removed the speed of the roll increases to 900 rpm (the field characteristics are unchanged) la ea dev m (a) calculate the maximum torque (units of nm) that the motor can supply with this applied voltage (b) calculate the value of the armature resistance, ra (in ohms) (c) at operating point 1 (loaded condition), the field current, i, and the total input power (armature field), are measured to be to be 10 a and 28,600 w respectively. use this information to calculate the value of the field resistance, rf (in ohms). (d) (d) at operating point 1 (loaded condition), calculate the motor efficiency. express your answer as a percent to at least 2 significant digits. (d) if the field voltage is reduced by 1/2, calculate the new stall torque (in nm) of the motor (f). if the field voltage is reduced by 1/2, calculate the new no-load speed (in rad/sec)

Point charges q1 = 51 µc and q2 = −27 µc are placed 1.0 m apart, with q2 on the right. what is the force (in n) on a third charge q3 = 19 µc placed midway between q1 and q2? (assume the positive direction is to the right. indicate the direction with the sign of your answer.)