subject
Physics, 04.05.2021 14:00 dounutalien

Two-fifths of a number is 23.2, find the number.
A. 116.0
B. 58.0
C. 46.4
D. 29.0
E. 14.5
11​

ansver
Answers: 1

Another question on Physics

question
Physics, 21.06.2019 19:00
Prompta snowboarder stands at the top of a hill and decides to see if he can increase his speed on his next trip down the slope.describe one thing the snowboarder could do to incrlase his speed on the slope. explain why this would cause his speed toincrease relate one of newton's laws to this problem.
Answers: 2
question
Physics, 22.06.2019 05:00
Aperson stands on a platform, initially at rest, that can rotate freely without friction. the moment of inertia of the person plus the platform is ip. the person holds a spinning bicycle wheel with its axis horizontal. the wheel has moment of inertia iw and angular velocity ωw. take the ωw direction counterclockwise when viewed from above. part a what will be the angular velocity ωp of the platform if the person moves the axis of the wheel so that it points vertically upward?
Answers: 1
question
Physics, 22.06.2019 06:30
5submission this assignment is worth 20 points total. you are required to submit the following by next lab: 1. (3 points) determine the equation for the output angular velocity ω2 = θ˙ 2 as a function of θ1, ω1 = θ˙ 1 and α. you must show all your work to receive credit. 2. (2 points) use the result of problem#1 to plot ω2 over 0 ≤ θ1 ≤ 360deg with ω1 = 360deg/sec. do this for α = {10,30}deg. show the results on the same plot and properly label the axes, title, legend. for this you can use matlab or ms excel. 3. (3 points) determine the equation for the output angular acceleration ω˙ 2 and create a plot similar to the one in problem#2. 4. (10 points) submit plots of the results (ω2 and ω˙ 2) obtained from creo/mechanism and compare them to results of problem#2 and problem#3. note that you should do these comparisons for the two cases with α = {10,30}deg. 5. (2 points) provide a brief explanation of the results. did they match? what are the implications as misalignment angle increases?
Answers: 3
question
Physics, 22.06.2019 10:50
Asheet of steel 1.5 mm thick has nitrogen atmospheres on both sides at 1200oc and is permitted to achieve a steady-state diffusion condition. the diffusion coefficient for nitrogen in steel at this temperature is 6 x 10- 11 m2 /s, and the diffusion flux is found to be 1.2 x 10-7 kg/m2 -s. also, it is known that the concentration of nitrogen in the steel at the high-pressure surface is 4 kg/m3 . how far into the sheet from this high-pressure side will the concentration be 2.0 kg/m3 ? assume a linear concentration profile.
Answers: 3
You know the right answer?
Two-fifths of a number is 23.2, find the number.
A. 116.0
B. 58.0
C. 46.4
D. 2...
Questions
question
Law, 11.05.2021 20:20
Questions on the website: 13722367